Snow Cat Service

12/21/2024

Looking good!!!

We have been working on a set of tracks for a Piston Bully PB - 070. We are converting it over to a chromoly snow cleat instead of the OEM aluminum. We also added removable ice spike to a few of them just in case they are ever needed.

10/26/2024

Hot off the cutting table!!! 10 gauge brushed stainless steel emblems.

Thiokol = $50
Spryte = $35
Imp = $25

Email if you’re interested.

[email protected]

09/21/2024

We’ve got a fresh set of LMC 1500 tracks ready to go. These are a HEAVY DUTY version with a welded on tire guide. These are an absolute must if you machine is breaking cleats on a regular basis.

05/29/2024

Another C4 ring gear down!!!! These are amazing when driven kindly. Pulling stuck vehicles and popping the clutch = no bueno!! Should have it up and going soon!!

05/27/2024

1201 getting a new engine and wiring harness!! We are your source for OEM Thiokol, DMC, & LMC parts and service.

05/03/2024

LMC POPSICLE BACKING PLATES

9/16” hole
3” center to center spacing

LMC and DMC groomers.

Make an offer!!

05/03/2024

Pisten Bully Cleats

37” long
3.125 tall

8 holes total

Hole pattern from side of cleat to center of holes is as follows.

1.25”; 5”; 8.6875”; 14.75”; 22.25”; 28.375”; 32.125”; 35.8125”.

I’ve got 3 of these.

Make me an offer!!

05/03/2024

Pisten Bully cleats/grousers.

821.2932.111.02.

44.0625” long
3.25” tall

Hole pattern = 12 holes going from side of cleat to center of hole spacing is as follows.

1.1875”; 5.125”; 8.3125”; 12.25”; 16.125”; 20.0625”; 21.875”; 29.375”; 31.125”; 35.0625”; 39”; 42.875”

I’ve got 5.

Make me an offer!!

05/02/2024

Backing plates. I think they might be Pisten Bully parts. Whatever they are are nice rounded backing plates. galvanived. NOS

Qty 780

4.95” long
1.40” wide53” hole diameter
3.00” hole spacing

MAKE AN OFFER!!

05/02/2024

Time to thin out some inventory…. I’ll be posting lots of random stuff for liquidation in the coming weeks.

Hope some of this stuff will be useful to someone.

LMC # 351610875” OD51” ID45” Tall

These are used for belt collars on big machine track sets. They are nice machined collars with tapered edges.

I’ve got a total qty of 4000.

Make me an offer!!

01/23/2024

After too many years….. We are FINALLY fabricating axles!! This one is for a front LMC 1800. This first batch will be 1800 and 1500 axles!!

01/15/2024

Time for this old 1200 to get some new color!!

The inside old paint is an absolute nightmare to remove!!

This should give this machine longevity long into the future!!

12/01/2023

Trial fitment of the aluminum intake with Holley sniper and long tube headers. Looks like it’s all going to fit. We are also adding a gear vendor splitter, so we rotated the park brake to make it all fit in the tunnel.

11/28/2023

Time to fit a Holley sniper and some custom long tube headers.

11/22/2023

Getting this 1200 ready for a serious makeover!! Stay tuned.

11/03/2023

LED lighting overload! This super imp is about ready to hit the snow!!

11/02/2023

First delivery of the season. Many more to come……

10/21/2023

Getting our shelves all stocked up for the season. We are your go to for Thiokol, DMC, LMC parts.

We have two sets of these 601 tracks!! Cleats and belting are NOS!

Email is best